by Davis Baron
Many surfaces aren't quite ready to serve as the base for a single coat of oil-based or latex paint. They may soak up too much paint, or be uneven. They may be discolored. They may have chemical or physical properties that make applying a single, even coat nearly impossible.But any interior or exterior home painting project will require much more.For all but the smallest jobs, a ladder is a must.Make sure you overspend here. That doesn't mean buying foolishly, but getting more ladder than you think you need. Walls are always higher than they look and you need to stand two or even three steps down from the top rung for safety.
Get something ultra sturdy. The ladder will have to support your body weight, plus a bucket of paint or a heavy spray canister. Add to that, brushes, pans, rollers and other equipment you want with you and the ladder needs to support about 10-15% more than your weight. If you fall, even if you don't injure yourself, you'll have a heck of a mess to clean up. Overspend.
With a primer, only one coat of the final type is needed, resulting in an overall cost reduction.You don't want to do that in the original container. Plus, when using a roller, you'll need a paint pan or two.There are optional lids that can be helpful, too. A standard paint can lid can be a real pain to open, especially after paint dries around the top lip. Slip on lids, some with paint pouring spouts can save you a lot of trouble.
Primer helps even out the final color in another way, too. The amount of paint soaked up, surface discolorations and other defects can cause a final coat to have a slightly different shade from one area to the next.That can be up to 80% of the total time spent. Keep that number as low as possible by getting good materials.Masking tape, sometimes known as blue tape, is a must for those jobs that require painting window sills, walls near baseboard and other close areas. Even the most skilled professional can't avoid getting paint on other surfaces without it.
A primer can create a flat, even color that masks those problems. It provides a uniform starting point to which to apply the final paint. That results in a more uniform final result.Ceiling paint projects are an obvious example. But even when paint isn't dripping from above, it's all too easy to splatter some around. A slight flick of the brush or a little too much speed with the roller is all it takes to fling paint droplets against a floor. Cover everything well.Then, thankfully, every painting job comes to an end - at least for a day. Once that stage is reached, cleanup begins. Masking and covering will help make that quicker. But there will still be brushes and rollers to clean. Few will want to endure the expense of simply throwing the day's tools away and starting with new ones tomorrow.
If you want to know more about <a href='http://aplusseo.com.au/'>Search Engine Optimization</a> and <a href='http://aplusseo.com.au/'>Search Engine Optimisation</a> you can ask the author for more information.
---------------------------------------------------
You are receiving this because you signed up for it on 2011-08-23 from IP
To fine-tune your selection of which articles to receive, just login here:
http://www.uniquearticlewizard.com/bloggers/
using your username:
To unsubscribe please use the following link:
http://www.uniquearticlewizard.com/unsubscribe.php?mail=kidloveme.huyen@blogger.com&code=b83952f8ca040e326c958cbc4b8fd96e
---------------------------------------------------
---------------------------------
New Unique Article!
Title: Painting Equipment Tips
Author: Davis Baron
Email: sales@aplus.net.nz
Keywords: Painting Equipment
Word Count: 511
Category: Hobbies
---------------------------------
No comments:
Post a Comment