Sunday, January 22, 2012

juliet13689@gmail.com

Interior Preparation Guide

by Kate Thomas

Apart from preparation, which is often 80% of the job, painting an exterior wall is about as easy as it gets. But there are still a few guidelines useful to follow to achieve the best final result.Adding to the difficulty is the fact that interior preparation jobs require much greater care than for exterior surfaces. Washing is harder. Dust from sanding requires special handling to avoid making the complete house unsanitary and possibly unhealthy.

But the results will be well worth the effort. A well-prepared interior surface makes painting go quick and easy. It produces a wall that shines and paint that lasts much longer.Step one is to remove any wall fixtures, outlet or switch covers, or decoration from the area and make repairs. Unless you intend to put them right back in the same place, you'll want to plug any nail or screw holes with putty. Any gouges or cracks are fixed at this stage. Wood filler goes on easy and dries quickly, leaving a surface that can be sanded to perfection.

Rapid peeling results from a combination of factors. Painting over wood that contains too much moisture is the most common. Mildew is much less often a problem. That can make it possible to skip any but minor cleaning before sanding. A quick wipe with a moist cloth may be all that's needed.Any sections with peeling paint should be dealt with before sanding. A 6-8 inch scraper can do large areas quickly. For corners, angles and other close-in areas a smaller blade will be necessary. For really stubborn areas that look like they'll continue to peel even after sanding, a heat gun can help loosen the paint.

Sanding is usually easier for interior jobs, as well. Rough spots will need to be dealt with. Anything that is visible before painting will appear magnified after the new paint is applied. Still, it's important to control dust. You'll need a mask to prevent inhaling particles that come off the surface. Repeated exposure can lead to allergic-like reactions. After sanding a section, be prepared to wipe down the area with a dry cloth and/or vacuum periodically. Those same particles can fall onto wall surfaces and the carpet or floor where they get blown into the air later.

Wrinkling has a similar look, but occurs when paint droops like sagging skin. That can happen when the consistency of the paint used is too thick. Oil-based paints are especially prone to this.In some cases, a simple primer applied before the top coat is all that's needed to prevent them showing through. In other cases, it may be necessary to sand more thoroughly or even replace sections of drywall.

If you want to know more about <a href='http://onlinecosmetics.net.au/'>mac cosmetics</a> and <a href='http://onlinecosmetics.net.au/'>cosmetics</a> you can ask the author for more information.

---------------------------------------------------
You are receiving this because you signed up for it on 2011-08-23 from IP
To fine-tune your selection of which articles to receive, just login here:

http://www.uniquearticlewizard.com/bloggers/

using your username:

To unsubscribe please use the following link:

http://www.uniquearticlewizard.com/unsubscribe.php?mail=kidloveme.huyen@blogger.com&code=b83952f8ca040e326c958cbc4b8fd96e
---------------------------------------------------
---------------------------------
New Unique Article!

Title: Interior Preparation Guide
Author: Kate Thomas
Email: sales@aplus.net.nz
Keywords: Interior Preparation
Word Count: 449
Category: Hobbies
---------------------------------

No comments:

Post a Comment