Things To Avoid In Using Mat Board Cutter
by Sharlene Fleming
Every artist may need a mat board cutter in their artworks. If an artist wants to sell more works of art, he needs to use the right materials. This is indispensable in expanding his business. A cleaner cut may only be achieved by using the proper materials and cutters for the job. Here are some mistakes that you must avoid as you cut the boards to avoid ruining your work.
Over cut is a very common problem. If the blade has sunk deep into the board, you may cut more than what you need. You may destroy a portion of your work. A popular cause for this is the wrong positioning of the blade. If not overly cut, the mat may be undercut instead. This is when you cut the mat lighter than it is supposed to be. This may lead to jagged corners and uneven insides.
Sometimes, the cutter may no longer follow a straight path. Instead of cutting on the laid out line, the blade may wander out of its way. This results to a condition known as wings or a cut outside the corner of the mats. This may also be caused by a very deep cut that it starts to curve toward the external part of the materials.
Duller blades may cause problems as well. If the cutters are not sharp enough, its cut are uneven. The results may not be visually appealing. If the cutter has become duller, make sure to replace them with a sharper one right away. Some of the factors that can affect the sharpness of the blades are the quality of the boards and the utilization of the blades.
Cheap boards may worsen the matter. Some may think that they can save money if they buy mats with poor quality. They do not know the graveness of this mistake. The quality of the mats can affect the outcome of the cuttings, which can influence the overall quality of the artwork. This means that you lose more than what you thought you gained.
Some artists may try to cut more than one mat at a time. Bundling two or more mats makes it more difficult to cut them. If you insist, you can only get inconsistent cuts. Slight movements of the board may affect its incisions. If you put the mats together, the problem may get even more apparent.
Artists may also be wary of clamp marks. This is caused by the clamps that are used when holding the mats in place while he boards are cut. This prevents the blades from slipping and shifting. If the blades slip, the board may be damaged and the material is ruined.
It is also important that the right boards and cutter are used. When the edges are not even, the entire work may not look appealing. The backing sheets must be cut smoothly as well. To do this, you need to use the right boards and cutters at all times.
Even the angles of the blade matters a great deal. It has to stay at forty-five degrees for a cleaner cut. However, keeping its proper angle may be difficult. Not to mention the inconsistencies of the materials. For the best results, it is advisable to carefully choose the <A href="http://www.ezcuts.net">mat board cutter</A> you are going to use.
You can visit the website <a href="http://www.ezcuts.net">www.ezcuts.net</a> for more helpful information about Things To Avoid In Using Mat Board Cutter
---------------------------------------------------
You are receiving this because you signed up for it on 2011-08-23 from IP
To fine-tune your selection of which articles to receive, just login here:
http://www.uniquearticlewizard.com/bloggers/
using your username:
To unsubscribe please use the following link:
http://www.uniquearticlewizard.com/unsubscribe.php?mail=kidloveme.huyen@blogger.com&code=b83952f8ca040e326c958cbc4b8fd96e
---------------------------------------------------
---------------------------------
New Unique Article!
Title: Things To Avoid In Using Mat Board Cutter
Author: Sharlene Fleming
Email: nathanwebster335@live.com
Keywords: Arts,Crafts,Plaster and Gypsum Board
Word Count: 559
Category: Hobbies
---------------------------------
No comments:
Post a Comment